|
FlightCheck 5.5 Settings For OS X Panther & PDF-X-Robot.
Anytime you re-load your system, install, or re-install PDF-X-Robot™, you will need to set your FlightCheck ground control settings appropriately. Also, if you upgrade your FlightCheck, you may need to check and set your ground controls by this example for things to work correctly. |
|
 |
This tutorial is based upon FlightCheck Professional. FlightCheck Professional has far more controls to mess with than FlightCheck Designer. If you are running FlightCheck Designer, the light version of FlightCheck, your dialog boxes will be different and somewhat more brief or limited than what is shown here. In that case, just find the dialog boxes in common and set the settings as close as you can to what is here.
As you can see, we turn most of the stuff OFF anyway, just leaving the real important stuff turned on that is a definite quality problem. FlightCheck Designer will be fine to use with PDF-X-Robot™ if that is all you have.
To start, launch your FlightCheck application. Then, go to the "Preflight" menu and select "Ground Controls" as shown below.
Now, see the lock at the upper left corner of the dialog box. It should be locked, if so, click on the lock to open it. It must be unlocked as shown here for you to edit the settings. Leave the pop-up menu set to "Default" and begin stepping through these dialog boxes and setting them all as shown in the following screen shots.
Remember, if you have FlightCheck Designer, you will only have about three dialog boxes to set up, that's OK, just stay as close to these similar boxes and their settings as best you can.
|
|
Immediate Mac OS X User Support
for all PDF-X-Robot™ Users
|
Support and training is Software-Robotics core expertise. Below are the top three ways in which you can get immediate support. We guarantee our software products and will do what it takes to get you up and running. Below are the recommended steps to take when you need support help from us.
| (1) |
PDF-X-Robot Users Support Forum - We want all tech support funneled through our user to user support forums. All problems and help there are kept in a searchable support database. You can easily search out error messages and problems easily finding solutions. Additionally, you can get help from many seasoned users who have used PDF-X-Robot™ since beta testing! We watch this board all the time and you will be helped in short order by a technician or another user in our community.
|
| (2) |
support@software-robotics.com - Please Do not delay in emailing us, anytime. We want to know what problems you are having and to assist whenever possible. Whenever you email, BE VERY SPECIFIC as to exactly what is happening and what was the last thing that worked PRIOR TO the problem. After emailing us, we recommend that you proceed to search in our user forums.
|
| (3) |
software-robotics.com/docs/ - We have a support docs directory on our servers many pages of specific support info. There's not much here that you can't find at the support forum, but, we like to provide several points of access to support information. Additionally, there will be a folder named "docs" in your PDF-X-Robot™ application folder that has HTML help and support pages for easy access and use.
|
|
the Apple logo is a registered trademark of Apple Computer Inc., all other registered trademarks are the property of their respective owners, Dual Stream Publishing™, CataBot™, PDF-Robot™, PDF/X-Robot™,Workflow Robots™, Software-Robotics™, PageBot™, PDF-Agent™, and Page-Agent™ are all trademarks of SoftwareRobotics.com
All Contents © 2004 SoftwareRobotics.com All Rights Reserved Under US CopyRight Law
|
|
|
